Blast Cleaning Pressure/Surface Profile
Ambient Conditions/Paint Temperature
Electronic hygrometer TESTO 615
or
Sling Psychrometer
plus
Dewpoint Calculator
Magnetic Surface Temperature Thermometer
Wind Meter
Taylor Paint Thermometer
Conductivity Analysis of Abrasive and Surface Contamination
BRESLE kit with Conductivity meter and 400 ml, 100 ml beakers, 250 ml measuring cylinder, plastic gloves, funnel and filters
Hypodermic Needle Pressure Gage
Blast Nozzle Orifice Gage
Surface Profile Gage (Elcometer 123) www.elcometer.com
Pinhole/Holiday Detection
Surface Profile Comparator (Sand & Grit discs + 5x illuminated Magnifier)
Spring micrometer (Elcometer 124) with Testex press-o-film replica tape
NACE Standard RP0287-95 Field Measurement of Surface Profile of Abrasive Blast Cleaned Steel Surfaces using a Replica Tape
Plastic Calibration Shims
Investigation
Paint Inspection gage (Elcometer 141) to destructively measure thickness of each coat in a multi-coat system
ASTM Protective Coating Inspection Standards
SSPC VIS 2 (Standard Method for Evaluating Degrees of Rusting)
ISO Standard 4628 parts 1, 2, 3, 4, 5, 6. (Standard Method for Evaluating all Paint related Failures)
Inspection Mirror
Mini-Mag Lite
30x Microscope
Camera
Surface Cleanliness
NACE RPO178-95 Standard (Surface Finish Requirements for Tanks to be Lined for Immersion Service)
NACE VISUAL AID (Surface Finishing of Welds Prior to Coating)
SSPC VIS 1-89 Standard (Abrasive Blasting)
SSPC VIS 3-93 Standard (Hand-Tool & Power-Tool)
SSPC VIS 4-98/NACE N° 7 Standard (Waterjetting)
SSPC Surface Preparation Standards
SSPC-VIS 5/NACE VIS 9 standard (Wet Abrasive Blast Cleaning)
Coating Application
ISO 8501 Standard, part 1 (88) + supplement (94) and part 2 (94) (Abrasive Blasting and Hand-Tool & Power-Tools Cleaning)
SSPC Coating Application Standards
Stainless Steel Rule for Measuring the proper ratio of Paint Components
Wet Film Thickness
Stainless Steel Wet Film Thickness Gage
Dry Film Thickness
Elcometer 345F, Digital Dry Film Thickness Gage
or
Positector 600 with IR Printer
Adhesion Testing
Master Template for cross-hatch adhesion test
Positest â Pull-Off Adhesion Tester (DeFelsko) www.defelsko.com
Tinker & Razor M-1, Low Voltage Wet Sponge, Holiday Detector www.tinker-rasor.com
NACE Standard RP0188-99 Discontinuity ( Holiday ) Testing of New Protective Coatings on Conductive Substrates
Various
Decameter
PortableTyping Machine
Fall arrest harness